PPTP Server Ubuntu 11 04 : cybexhosting.net

Hello and welcome to our comprehensive guide on setting up a PPTP server on Ubuntu 11.04. In this article, we will walk you through the process of installing and configuring a PPTP server on your Ubuntu 11.04 system. PPTP (Point to Point Tunneling Protocol) is a widely used VPN protocol that allows secure communication between remote clients and servers over the internet.

Understanding PPTP Server

PPTP is a VPN protocol that uses a combination of TCP and GRE protocols to create a secure and encrypted tunnel between two endpoints over the internet. A PPTP server can be used to allow remote users or clients to securely access resources located behind it. In this guide, we will be setting up a PPTP server on Ubuntu 11.04 that can be used to provide secure remote access to your network.

What is Ubuntu 11.04?

Ubuntu 11.04, also known as Natty Narwhal, was released in April 2011. It was the first version of Ubuntu to use Unity as its default desktop environment. It was also the first version of Ubuntu to drop support for the GNOME 2 desktop environment. Ubuntu 11.04 was supported until October 2012.

Why Use PPTP Server on Ubuntu 11.04?

Using a PPTP server on Ubuntu 11.04 has several advantages. Firstly, it allows you to provide secure remote access to your network resources. It also allows you to create a secure and encrypted connection between two endpoints over the internet. Additionally, PPTP is a widely used VPN protocol, which means that it is compatible with a wide range of devices and operating systems.

Installing PPTP Server on Ubuntu 11.04

The first step in setting up a PPTP server on Ubuntu 11.04 is to install the necessary packages. To do this, open a terminal window and run the following commands:

“`
sudo apt-get update
sudo apt-get install pptpd
“`

Once the installation is complete, you will need to configure PPTP server.

Configuring PPTP Server

To configure PPTP server, you will need to edit the /etc/pptpd.conf file. Open the file in a text editor and add the following lines:

“`
localip 192.168.0.1
remoteip 192.168.0.234-238,192.168.0.245
“`

The localip parameter specifies the IP address of the PPTP server, while the remoteip parameter specifies the range of IP addresses that will be assigned to the remote clients.

Creating PPTP User Accounts

The next step is to create PPTP user accounts. To create a user account, you will need to edit the /etc/ppp/chap-secrets file. Open the file in a text editor and add the following lines:

“`
username pptpd password *
“`

Replace username with the username you want to use, and password with the password you want to use. The * character is used to specify that the password should be accepted for any remote IP address.

Testing PPTP Server on Ubuntu 11.04

Once you have configured PPTP server, you can test it by connecting to it from a remote client. To do this, you will need to use a PPTP client software. One such software is the built-in PPTP client in Windows operating system.

Connecting to PPTP Server from Windows

To connect to PPTP server from Windows, follow these steps:

1. Open the Network and Sharing Center in Windows.
2. Click on Set up a new connection or network.
3. Select Connect to a workplace and click Next.
4. Select Use my Internet connection (VPN).
5. Enter the IP address of the PPTP server and click Next.
6. Enter the username and password you created earlier and click Connect.

If the connection is successful, you should be able to access the resources on the Ubuntu 11.04 PPTP server from your Windows machine.

Troubleshooting PPTP Server on Ubuntu 11.04

If you encounter any issues while setting up or using PPTP server on Ubuntu 11.04, here are some troubleshooting tips you can try:

Check Firewall Settings

Make sure that the firewall on the Ubuntu 11.04 server is not blocking incoming PPTP traffic. You can check the firewall settings by running the following command:

“`
sudo ufw status
“`

If the firewall is enabled, make sure that it allows incoming PPTP traffic.

Check PPTP Server Logs

You can check the PPTP server logs to see if there are any errors or issues. The logs are located in the /var/log/syslog file. You can view the logs by running the following command:

“`
sudo tail /var/log/syslog
“`

Restart PPTP Service

If you make any changes to the PPTP configuration file, you will need to restart the PPTP service for the changes to take effect. You can restart the PPTP service by running the following command:

“`
sudo service pptpd restart
“`

FAQs

What is the difference between PPTP and L2TP?

PPTP and L2TP are both VPN protocols that can be used to create secure and encrypted connections between two endpoints over the internet. The main difference between the two is that PPTP is considered to be less secure and less reliable compared to L2TP.

Can I use PPTP server on Ubuntu 20.04?

Yes, you can. The process of setting up a PPTP server on Ubuntu 20.04 is similar to that of Ubuntu 11.04.

Can I use PPTP server to connect to a remote network?

Yes, you can. PPTP server can be used to provide secure remote access to a network resources located behind it.

Source :